Downloads

PRO-ATC/X Add-Ons and Updates

proatcx_sndrec_tool.zip version 1.1(42.356 Kb; Oct./08/2012)
  • Recording Tool for new voice sets (version 1.1.0.0)
proatcxhelp_gb.pdf (9.607 Kb)
  • Free manual for evaluation purpose.
  • Update 1.9.2.8 (15 Apr 2021)
  • Caution! Online access is required to use this version of PRO-ATC/X!
    • Should you have a version below 1.9.2.2, please register to the forum. Verified forum users can always access the latest full setup and update from there.
    • With version 1.9.2.2 and above you'll be informed automatically if you have the according option ticked. Otherwise please check for updates manually under Options or Help.
    • Make sure you assign again admin rights to the new "proatcx.exe" file.
    • UAC (User Account Control) should be set to the lowest, if you have installed PRO-ATC/X or the simulation into a protected folder.
      • New to version 1.9.2.8
        • [New] Altitudes on imported flight plans are now considered.
        • [New] The ATIS frequency is now set to Stand-by, when launching a flight. The active frequency is set to clearence.
        • [New] The issues on setting COM frequencies on some aircraft (Maddog, AS-Airbus, DA-CRJ700/900) are fixed.
        • [New] The Italian airspace only accepts airways below 30500 ft on IFR, no DCTs. You'll get a warning message, when trying to import a flight plan a flight plan not considering this restriction but it'll still be loaded. Proatcx is calculating the altitude reached at a certain waypoint by the climb rate possible with the selected aircraft and is taking this into account. So no warning message if you are above 30500 ft.
        • [Fix] Missed Approaches are reworked.
        • [New] Requesting for a direct to waypoint will not assign a heading anymore.
        • [Fix] Emergencies are corrected.
        • [New] The X-Wind factor is now taken into account. All headings assigned are now crosswind corrected (also the heading to set value on the moving map).
        • [New] Now adding a second waypoint prior to FAF if necessray (CRDWP then CRDWF).
        • [New] When requesting a different flight level, the altitude you are at is now the reference, not the altitude assigned.
        • [New] If no runway available for landing, due to the option 'Not available for Landing' and due to wind conditions, the longest runway will be assigned by dis-regarding the options set to the runways.
        • [New] The approach is now assigned 35 Nm before reaching the route exit waypoint, even if no STAR was assigned.
        • [New] Adding user defined holdings have been reworked. You'll now have to edit each procedure waypoint as AIRACs are doing. Holdings defined on earlier versions are not considered anymore. Sorry for that. How ever, when adding a waypoint as hold it'll recognize in most cases the heading to the next and also the minimum altitude if defined by AIRACs.
        • [New] The Moving Map has a new column 'Hold' under Route waypoints. It shows '!' if a holding is possible, it shows 'Exp' if a holding is expected and it shows 'SET!' if a holding was assigned.
        • [New] On the moving map under 'Help' you may now define an Auto Pause at TOD or at a certein altitude after TOD.
        • [New] The flight plan management has been changed. Flight plans were saved to the internal database before. Now they are saved to an xml file within the folder 'data'. Only the routing is saved now, no waypoints anymore. Loading a flight plan may therefore result into warning messages like 'Waypoint is not part of airway'. This is caused by a different AIRAC cycle used for saving/loading the fp. Importing a flight plan will refuse the import in that case.
        • [Fix] Import of AIRACs has been optimized.
        • [Fix] R-NAV/V-NAV approaches are corrected.
        • [New] VOR Radials to be intercepted defined by AIRAC data are now considered.
        • [Fix] DMEs are adjusted aswell. They are now working as expected
        • [Fix] Vectors are re-worked.
        • [Fix] Missed approaches are re-worked.
        • [New] Flight plans are now imported correctly, when a SID or STAR was defined, also if a SID/STAR Transition was defined.
        • [New] Flight plans are not erased anymore if not produced by PRO-ATC/X.
        • [New] PRO-ATC/X generated flight plans are only erased at the end of a flight.
        • [New] Saved Situation has been adjusted. Situations saved below version 1.9.2.8 will work, but third party aircraft will not be recognized. In some cases you'll have to setup the AP by your own. Sorry for that.
        • [New] A new tab 'Voices' has been added to the options window. Same functionality as under main menu/Data/Voices. Most of the users are expecting this under Options. Main menu/Data/Voices is still available.
        • [New] The window 'Flight Plan To Be Generated' has a new checkbox 'Generate third party flight plan'.
        • [New] A button named 'Corridor' has been added to the moving map (on top). If active, it'll show the corridor you'll have to be in. Of course only when airborne.'Heading corrections shouldn't happen anymore, when within the corridor. The width of the corridor can be adjusted under 'Options'.
        • [New] The option 'Auto Save Flight Plan' has been removed from the Options. It simply takes to much time with some third party panels. PRO-ATC/X is still saving it's own state to be re-loaded in case of a CTD.
        • [New] The sim rate can now be set via the In-Flight Menu/Other Options. It was actually meant to be used by BETA Testers only, why not let it be used by others as well?
        • - If set to above 1x, it will reduce automatically to 1x, when...
        • - Aircraft bank > 5
        • - Distance to the next waypoint is below 7.5 NM and the heading difference to the over next waypoint is > 5 degree.
        • - Any communication on the COM-Radio. This is needed, as instructions are often in a queue. It simply needs time until communicated and confirmed via voice.
        • [New] The tab 'Folder Paths' in Options Dialogue has been renamed to 'Flight Plan Folders'.
        • [New] Activesky Flight Plan is now generated.
        • [New] PRO-ATC/X is now checking if the default Sim-ATC is active. If so, it'll ask to de-activate it automatically. The flight sim should be re-started if running.
        • [New] Departure and arrival via Vectors can now be requested.
        • [New] Flight plan import with only one waypoint works now as the single waypoint will be duplicated.
        • [New] In the mooving map the settings on AI visibility is saved and reloaded next time.
        • [New] In the flight planning window you may now select a gate by right click on the map.
        • [New] Under options you can now define the color for parkings on the map.
        • [New] Runways can now be defined as preferred up to 5 Kts wind velocity or up to 10 Kts. 10 includes 5!
        • [New] PRO-ATC/X now recognizes which simulation is loaded (FSX/P3D), provided it is running on the same PC. This doesn't work, when running PRO-ATC/X on a client and the sim on a server.
        • [New] In-Flight menus are re-worked. They are only closing, when clicking on 'Close Window' or if a function is executed. It'll even re-open the menu on some items. You may return to the prev menu by clicking '<<' or '>>' for the neyt.
        • [New] Added a new in-flight menu 'Airport COM-Frequencies', selectable under In-Flight-Menu-->FP Information.
        • [New] Third party aircraft paths under options have been reworked. They are now categorized by publisher.
      • New to version 1.9.2.5
        • [Changed ] Moving Map - The ILS frequency and the ILS heading is now displayed beside the active runway (if available)
        • [Changed] In-Flight Menu - The ILS frequency and the ILS heading is now displayed beside the active runway (if available)
        • [Changed] Final Approach - The altitude is now assigned again when cleared for approach (contact tower at the marker)
        • [New] If vectors are expected by AIRAC's, now adding 2 vector waypoints if the angle to the next waypoint is > 90 degrees and the distance to next is >= 5 NM. They'll be named as CRD01 and CRD02. Both will be set at a distance of 5 NM to prior waypoint
        • [Changed] Wrong formatted sound files are still not played as it was already planned with the last BETA (G) but the exception is now handled correctly, therefore the application continues working as expected
        • [Fixed] The issue on pilot requesting for a higher altitude, where the pilot wasn't telling the altitude
        • [Fixed] If Hold at 1st STAR Waypoint, no hold exit instruction given
        • [Fixed] If wind velocity was below 6 kts and no preferred runway, changes of wind direction was ignored
        • [New] Sound file errors are now recorded in the log, but now ProATC/X will continue with the next file and not CTD. No sound wil be heard for the missed file. By default, all sound files delivered with PRO-ATC/X are sampled at 11025Hz, 8-bit Mono. Higher values are not necessary
        • [Changed] Vector approaches 'tweaked'
        • [Fixed] When minimizing the moving map, it can be re-opened by clicking on the PRO-ATC/X icon on the taskbar
        • [Changed] The old aircraft database (if existent: v1922 and up, will be saved as aircraft-bak+[Version].xml within the data folder on update)
        • [Fixed] GPS flight Plan updates if arrival runway or approach is changed
        • The Changelog can also be opened (TXT and PDF) from the HELP section of the main screen
        • [Fixed] Saved log files screen TIME column
        • [Changed] Saved log files screen Sim column set to Upper Case
        • [Fixed] GUI 'English spelling and Grammar
        • [Fixed] GUI 'GERMAN spelling and Grammar
        • [Changed] Aircraft DB updated to included supported aircraft
        • [New] The Aircraft DB will only be updated for users updating from a version before V1.9.2.3
        • [New] Changelog Screen at 'first start' of new install: shows all changes in the current release.
        • [Changed] ActiveSky Frequencies taken into account (122.00, 122.02, 122.05, 122.07)
        • [Changed] Airline DB changed. Meridiana Airline removed, taken over by AIRITALY (March 2018). AIRITALY ICOA updated (ISS). Thanks to Stefano (MadDog Developer) for the heads up. It will not be erased, just in case its ID was used in a flight plan.'Air Italy' is in the airlines listing twice
        • [Changed] All airports in the DB are now assigned a Country
        • [New] Export Flight plan for MadDogX
        • [New] None Existing Aircraft (due to database update) referenced in flight plans are now replaced by 737-900
        • [Fixed] Sound issue when set to below 100%
        • [Changed] Exit holding procedure changed to include ALL hold types
        • [Fixed] Requesting for a different approach or runway while in a hold will not result into entering the hold from the beginning
        • [Changed] When opening the In-flight PRO-ATC/X options, after activating/de-activating an item the window will be displayed again, so you may tick/un-tick multiple options without going the whole way back to the options menu
        • [Fixed] Incorrect departures allocated in certain situations
        • [Fixed] Contacting ground when requesting another departure with Clearance Delivery
        • [New] Quality Wings 787 exported flight plans for FMC now supported
        • [Changed] MadDogX exported FMC route changed to include airways (Confirmed by Stefano)
        • [Fixed] Updating controller voice XML's
        • [New] Vectored SID: Is now assigned as 'vectored departure to [first_route_waypoint] and then as filed'
        • [Changed] A different approach cannot be requested anymore while executing a missed approach
        • [Changed] On the 'Import AIRAC window' the message displayed is now 'Status: Ready...' not anymore 'Status: Inactive' as this has confused many users
        • [Changed] Text message when executing a checklist is not displayed anymore, when options are set accordingly
        • [New] If vectors defined by AIRAC, a vector will now always be added at a distance of 5 NM to the last wp
        • [Changed] Countries updated
        • [Changed] PRO-ATC/X is now running more efficiently. It needs far below 1% of CPU time (measured with a Intel-7 4790K CPU, not overclocked). It needs 0.1% to 0.4% while moving map displayed and sound files played! You may check on 'Windows Task-Manager'). With a slower CPU this value might be a bit higher but not much
        • [Fixed] Exiting a holding will result in 'Continue own navigation to next waypoint' or to 'Turn to heading xxx' + altitude to set
        • [Fixed] CRDWF, which is the waypoint added if the angle to the FAF is greater than 90° is now assigned by heading to be established. You'll get corrections assigned if not on course
        • [Changed] Pilot is now waiting one second before confirming the instruction, which is even more realistic
        • [New] Changelog displays on first run only before main ProATC/X screen
        • [Fixed] Controllers repeating messages
        • [Fixed] Tower not clearing for landing in some cases
        • [Fixed] If AIRACs are defining a vector, then the vector will now be added as far as the heading difference to the waypoint following is greater than 70°. This one will be declared as 'CRDLL' (Coordinates waypoint to Lat/Lon). This one will only be added if no CRDWF (Coordinates waypoint to FAF) has been added
    Information on prior updates as PDF...
    • This PDF contaings the update history up to version 1.9.2.2

      Impressum